• Strapon harness for XL dildos?

    1395905259
    someperson [sign in to see picture]
    • Rank: Major
    • Posts: 34
    • Joined: 8 Nov 2012

    I was wondering if there are certain strapon harnesses that would work with large dildos. Specifically I would like to use the harness with this dildo: http://www.lovehoney.co.uk/product.cfm?p=27293

    Also, are there harnesses for larger waist sizes?

    1395905827
    someperson [sign in to see picture]
    • Rank: Major
    • Posts: 34
    • Joined: 8 Nov 2012
    1395942502
    NWTVFiona [sign in to see picture]
    • Rank: Major
    • Posts: 72
    • Joined: 27 Mar 2014

    I went for this Harness in the end... it was either going for this or spending double on a leather one atht would need some serious softening before use...

    The only issue with these is that the straps are way too long... but guess you can cut them or even tie them to something or someone lol xx

    http://www.lovehoney.co.uk/product.cfm?p=27200

    It comes with a variety of rings for different size Dildo bases if they are not Vac-u-lock so you just remove the plug and place the dildo through the hole. Good think I like about this harness is that the strap around the ring are the straps that pull tight round your waist and legs so it puls everything in nice and close.

    1395946299
    someperson [sign in to see picture]
    • Rank: Major
    • Posts: 34
    • Joined: 8 Nov 2012

    So looking at the dildo, the circumference is 10 (which would be the circumference of the shaft) and the suction cup looks to be just about the same width (although it is a little smaller near the base so maybe a 2 inch o ring would fit it). According to that calculator I would need an O ring of 3.18 inches, but none of the harness on LH go past 2 inch O rings. So I could either try a 2 inch one and put the suction cup through the ring, but then I would be worried it wouldn't be stable enough or that it would fall out. Or I could get a 3 or more inch O ring and put the whole dildo through.

    My question now is, can these harnesses adjust to fit larger O ring sizes? for example could I fit a 3 inch O ring in those harness mentioned before? Or does it only fit up to 2 inch O rings? If these could fit larger rings I could always buy one and then just get a bigger ring if I needed it.

    1395947233
    sweetlove666 [sign in to see picture]
    • Rank: Field Marshall
    • Posts: 2295
    • Joined: 17 Nov 2008

    you could alwyas buy some rope and make your own one? if you google "shibari strap on harness" you will get some results on how to make one using rope.

    That way you can use whatever toys you want, and it will definatley fit the waist

    1395948404
    BrumGuy [sign in to see picture]
    • Rank: Colonel
    • Posts: 496
    • Joined: 16 Jun 2011

    NWTVFiona it you slacken the straps so that you can step out of the harness that will give you an idea where to cut the straps. That 'Cordoba' type material when cut needs the ends to be singed with a lighter this will stop any fraying.

    Post a reply to this thread

    Please sign in to post messages to the forum.