• Clone a Willy. Flared base?

    1304448913
    Pixieking [sign in to see picture]
    • Rank: General
    • Posts: 672
    • Joined: 31 Aug 2010

    Hey folks. Baaaaaasiically, I've had my interest piqued in the clone a willy kit, after reading a review about it and watching the lovehoney video (again) but, my hopes of using it were slightly dashed when I realized it would produce a completely unflared dildo. Not very safe if you want to go plundering the tunnel of doom.

    So, I'm hoping that one of you clever folks will be able to suggest something to embed in it to make it flared. I've already decided I wouldn't put the vibe in it, so there is all that empty space for anchorage.

    Also, If anyone has used the kit before, I'd like to ask how much spare rubber they had left over after using the kit, as the easiest way of getting around this would be to just build up the edges of the tube and over fill it, making a nice, stable flare.

    Thanks all. =)

    1304452703
    EmilyBlenkins [sign in to see picture]
    • Rank: Major General
    • Posts: 382
    • Joined: 1 Nov 2010

    I can't really give my opinion because I haven't used a kit (although I want to, and I'm intrested in the outcome of this thread) but you could always buy a extra moulding powder bag - http://www.lovehoney.co.uk/product.cfm?p=16713

    1304452824
    Clown Feet [sign in to see picture]
    • Rank: Major
    • Posts: 111
    • Joined: 18 Nov 2009

    I'd like to know if these kits are any good. Pros and cons and stuff. I've been thinking of getting one to try and make something for my gf but always held back from actually buying it.

    1304453450
    EmilyBlenkins [sign in to see picture]
    • Rank: Major General
    • Posts: 382
    • Joined: 1 Nov 2010

    EmilyBlenkins wrote:

    I can't really give my opinion because I haven't used a kit (although I want to, and I'm intrested in the outcome of this thread) but you could always buy a extra moulding powder bag - http://www.lovehoney.co.uk/product.cfm?p=16713

    I just realised I said I all the way through that, I meant we/he :P

    1304455179
    Pixieking [sign in to see picture]
    • Rank: General
    • Posts: 672
    • Joined: 31 Aug 2010

    Hey clown feet. From what i've heard they are actually really good kits. The review I read (not on LH, though I have read LH ones too ofc. =) ) was submitted by someone who is incredibly critical and investigates materials and such very thoroughly. Seems like it's all good. =)

    The extra molding powder wouldn't do much good i'm afraid EB, as it's not the rubber you make the dildo out off, but the material you mold yourself with. I took another look at the product pictures and it seems like, along with a slight natural flair you would get with a natural penis that you wouldn't get with the dildo they use in the demonstration video, there should be enough rubber left over for me to make a decent base. Good times.

    1304455289
    Clown Feet [sign in to see picture]
    • Rank: Major
    • Posts: 111
    • Joined: 18 Nov 2009

    Be fun to make one when she's back :D I'll need to look into getting one.

    1304455359
    EmilyBlenkins [sign in to see picture]
    • Rank: Major General
    • Posts: 382
    • Joined: 1 Nov 2010

    Pixieking wrote:

    Hey clown feet. From what i've heard they are actually really good kits. The review I read (not on LH, though I have read LH ones too ofc. =) ) was submitted by someone who is incredibly critical and investigates materials and such very thoroughly. Seems like it's all good. =)

    The extra molding powder wouldn't do much good i'm afraid EB, as it's not the rubber you make the dildo out off, but the material you mold yourself with. I took another look at the product pictures and it seems like, along with a slight natural flair you would get with a natural penis that you wouldn't get with the dildo they use in the demonstration video, there should be enough rubber left over for me to make a decent base. Good times.

    Ah, sorry for the useless input from me then :P

    1304455522
    Pixieking [sign in to see picture]
    • Rank: General
    • Posts: 672
    • Joined: 31 Aug 2010

    No bother! I really appriciate the thought. =)

    1304877686
    Pixieking [sign in to see picture]
    • Rank: General
    • Posts: 672
    • Joined: 31 Aug 2010

    Well that was a total failure.

    Tried to do the kit with folk in the house, so not only was I rushing, but I made a serious technical fault; I cut the tube and inch and a half too long. I way over-estimated the amount of molding gel there was and when fully filled there wasn't enough to completely cover myself. Added to the fact that I decided to skip using the cock ring because I thought I would be fine, and a mad panic trying to cut down the tube While the mix was inside it, it's safe to say it solidified before I could get it right.

    The spare molding powder is currently out of stock so I wont be able to do it again till mid june, but it's my own fault. Luckily, in my haste to cut the tube down to size, I only managed to make it slightly too short, and i'll be able to fix that with a bit of duct tape.

    Next time, cock ring essential, wait untill house is empty, and by god, get it right.

    Now I see why so many of the reviews start with "Our first attempt" =D

    1304878196
    Lady Ness [sign in to see picture]
    • Rank: Field Marshall
    • Posts: 2450
    • Joined: 16 May 2010

    That's ashame, hope it works better next time. In regards to the flared base you could get a suction cup and use that instead of the vibe. I know you can get one's that are different sizes so you'd just have to look for the right one.

    1304899793
    Mr Monster [sign in to see picture]
    • Rank: General
    • Posts: 856
    • Joined: 15 Sep 2010

    Try this - get yourself a doughnut cock ring http://www.lovehoney.co.uk/product.cfm?p=15226 or similar and wear it when you take the mould. The final shape should have a thick enough base for your purposes. You may have to extend the tube outwards , but a bit of plastic bottle and lots of tape should hold it for long enough to set the material.

    Let us know how it works..

    1304961921
    Pixieking [sign in to see picture]
    • Rank: General
    • Posts: 672
    • Joined: 31 Aug 2010

    That's a good idea actually.

    Unfortunately, since i'm gonna have to spend money on extra powder I really don't want to spend anymore money on it. I had a test run with the dry tube, and I think that just making sure i'm fully "in" will give me enough of a flare, just because the surrounding area will be pushed into the tube slightly aswell. I'm going to get a bit of card and make an oval, cover it in duct tape and seal it to the top of the mold, so I can make as big a base as I can with as little material. Hopefully i'll have enough.

    I was kinda of tempted to buy another kit, so that i'd get a fresh tube, more rubber so that I don't have to worry about not having enough and also the moulding powder, but £50 is far too much for a copy.

    I'm actually kinda annoyed that they give you so little for the kit, since i'm essentially average and i'm worried there wont be enough rubber. Ah well, I knew what I was getting into. The result will be worth the hasstle.

    1304989327
    Mr Monster [sign in to see picture]
    • Rank: General
    • Posts: 856
    • Joined: 15 Sep 2010

    Pixieking wrote:

    That's a good idea actually.

    Don't sound so surprised - I do have them occasionally...

    You could even use plasticene or something to add a bit of bulk. The only down side is that you sacrifice a little length in order to build up the base.

    1305472661
    biatch [sign in to see picture]
    • Rank: Officer Cadet
    • Posts: 2
    • Joined: 25 Sep 2009

    hi were just about to order the clone-a-willy vibrator, but my man is 9" and after reading all the reviews it is obvious that we are going to need extra mixture! Where do i purchase this from, as i cannot see if for sale on lovehoney, and we want to order it all at the same time so we can get started asap! Thanks :-)

    1305472858
    Kasumi [sign in to see picture]
    • Rank: General
    • Posts: 742
    • Joined: 27 Sep 2010

    Lovehoney do sell it

    http://www.lovehoney.co.uk/product.cfm?p=16713

    But it's out of stock at the moment

    1305474128
    biatch [sign in to see picture]
    • Rank: Officer Cadet
    • Posts: 2
    • Joined: 25 Sep 2009

    :-( thanks anyway :-)

    1305498247
    MrSarcastic [sign in to see picture]
    • Rank: Colonel
    • Posts: 250
    • Joined: 7 May 2011

    Tempted to try one of these myself sometime in the future be good to know how they appear.

    1305584258
    Dirty Red Angel [sign in to see picture]
    • Rank: General
    • Posts: 934
    • Joined: 16 Sep 2010

    Lovehoney - Hella Rouge wrote:

    A-ha! We now have the http://www.lovehoney.co.uk/product.cfm?p=21507 - No flared base required with a nice pair of balls on the end AND you won't have to forgo the vibe if you don't want to. Sorted.

    I'd give this a go if it was a bit lower in price. I don't want to appear to be tight-fisted but I wouldn't want to spend £40 if it went tits up!

    1305584614
    MissTerryCleavage [sign in to see picture]
    • Rank: Field Marshall
    • Posts: 1136
    • Joined: 1 Feb 2010

    Yeah me too, I asked for a video to explain it more & Bonny has put it on the list....

    1305989075
    MrSarcastic [sign in to see picture]
    • Rank: Colonel
    • Posts: 250
    • Joined: 7 May 2011

    Hella i will try it out if u need testers (forgot i posted in this thread).

    Still want to see the outcome myself, i want to see how much detial comes etc etc think id start with a cheap one then move up if i thought it worth it.

    Post a reply to this thread

    Please sign in to post messages to the forum.