• Pussy Pump

    1301018280
    cz123 [sign in to see picture]
    • Rank: Major
    • Posts: 8
    • Joined: 30 Apr 2010

    Grrr, why do things have to be so difficult, we have twied 2 different pumps now.

    1. One size fits all hand pump vagina pump thing, was way to big.

    2. bought a way smaller http://www.noogleberry.com/shop/Vaginal-Pumps/Cups/1-x-Vaginal-Cup/prod_45.html cup for same pump... tried again, and there was still a gap at the bottom where her bum is, so we either have a gab at the top or bottom where it does not touch.


    So any advice? anyone had this problem and solved it as I really want to get this working.

    Thanks

    1301019353
    Mr Monster [sign in to see picture]
    • Rank: Major General
    • Posts: 715
    • Joined: 15 Sep 2010

    Shave, lube up and push it on harder to get a good seal.

    1301019459
    cz123 [sign in to see picture]
    • Rank: Major
    • Posts: 8
    • Joined: 30 Apr 2010

    tried unfortunatly, Pushed harder and hit her bones, the gap seems too big like i could fit a finger in the gap at top or bottom depending where we place it, and this is the one much smaller.

    1301023613
    HotWings [sign in to see picture]
    • Rank: Major
    • Posts: 35
    • Joined: 14 Aug 2010

    Hmm, maybe a bit of a drastic idea, but you could possibly try re-shaping it as a last resort before chucking it?

    Utterly at your own risk:
    'd detatch everything apart from the cup itself, then pop it in the oven on low. Check it constantly until its just flexible enough to bend slightly. Then on the troublesome ends/sides, reshape it a bit. Run under cold water whilst holding the new shape and it should set. This assumes its a thermoplastic, but it most likely is. Obv please be careful, and best to undercook than overcook in this case. You should be able to reprat if at first its not right.

    /end ravings of a mad engineer

    1301039100
    SEXYGET 69 [sign in to see picture]
    • Rank: Field Marshall
    • Posts: 1869
    • Joined: 1 Dec 2008

    Could you cut, shape and glue a piece of rubber into the gap to complete the seal?

    Good luck! SG

    1301071027
    5mil [sign in to see picture]
    • Rank: Major General
    • Posts: 161
    • Joined: 11 Dec 2008

    It doesn't say what size the noogleberry cup is, so it's difficult to suggest an alternative. I guess you just need to try and compare sizes and look for a smaller model.

    I was worried about this issue too when I bought my OH a pussy pump for Xmas, as she's quite petite down there. I did a search and read through the forum posts on pussy pumps, and also read the reviews of the models LH sell, before settling on the Doc Johnson one, which at 4.2 x 3 inches, seems to be the smallest: http://www.lovehoney.co.uk/product.cfm?p=15121

    It works absolutely fine for us, just the right size and no problems getting a good seal.

    1301078845
    Ecksvie [sign in to see picture]
    • Rank: Field Marshall
    • Posts: 1186
    • Joined: 11 Jun 2009

    I've got the same pump as 5mil linked to, and it seems to be the right size on me as well.

    Are you sure you're using the pump right. Start off by pressing the pump right onto the skin so there's no gaps - once you've pumped once the suction should hold it on all by itself after that.

    1301079448
    cala [sign in to see picture]
    • Rank: Captain
    • Posts: 65
    • Joined: 7 Nov 2009

    hi ive had same problem one was way tooo big thats was this one http://www.lovehoney.co.uk/product.cfm?p=4784 so i got the doc johnson one which fits great, ive had no problems since i got this one http://www.lovehoney.co.uk/product.cfm?p=15121 hope it helps x

    Thread closed

    This thread is closed, so no new messages can be posted.